Chưa có sản phẩm trong giỏ hàng.
RDF870KN PM2.5 & CO2 Controller KNX
Giá: Liên hệ
RDF870KN (KNX) and RDF870MB (Modbus) controllers
● AC 230 V operating voltage, large, backlit display
● Display and setpoint adjustment for PM2.5 and CO2 control
● Display of room temperature, outside temperature, VOC (volatile organic
compound) and r.h. (relative humidity)
● Supports 1-/3-/4-speed On/Off fan or DC fan output
● Two multifunctional inputs for external passive and DC 0…10 V sensors
● Operating modes: Comfort, Economy and Protection
● KNX S-Mode for RDF870KN
● KNX commissioning via ETS or local control parameters
● KNX integration into Desigo via group (ETS) or individual addressing
● KNX integration into third-party system via group addressing (ETS)
● RS485 Modbus RTU slave mode for RDF870MB
● Modbus commissioning via third-party tool, e.g. Modbus scan, Modbus poll, etc.
RDF870MB can be configured as a room unit via DIP switches and it provides the
following additional functions:
● Setpoint adjustment and display for room temperature, VOC, RH and display of
outside temperature
● Four external outputs via bus and controlled by a master controller
Mounting on recessed square 86 mm box or round 60 mm with 60 mm fixing centers
and minimum 40 mm depth
● Display and setpoint adjustment for PM2.5 and CO2 control
● Display of room temperature, outside temperature, VOC (volatile organic
compound) and r.h. (relative humidity)
● Supports 1-/3-/4-speed On/Off fan or DC fan output
● Two multifunctional inputs for external passive and DC 0…10 V sensors
● Operating modes: Comfort, Economy and Protection
● KNX S-Mode for RDF870KN
● KNX commissioning via ETS or local control parameters
● KNX integration into Desigo via group (ETS) or individual addressing
● KNX integration into third-party system via group addressing (ETS)
● RS485 Modbus RTU slave mode for RDF870MB
● Modbus commissioning via third-party tool, e.g. Modbus scan, Modbus poll, etc.
RDF870MB can be configured as a room unit via DIP switches and it provides the
following additional functions:
● Setpoint adjustment and display for room temperature, VOC, RH and display of
outside temperature
● Four external outputs via bus and controlled by a master controller
Mounting on recessed square 86 mm box or round 60 mm with 60 mm fixing centers
and minimum 40 mm depth
TÀI LIỆU & HƯỚNG DẪN SỬ DỤNG
| Tải Xuống |
SẢN PHẨM TƯƠNG TỰ
Giá: Liên hệ
Giá: Liên hệ
Giá: Liên hệ
Giá: Liên hệ